Downpipe support

• one-piece wall bracket with adjustable wall distance
• rapid assembly (only 2 bore holes)
• high load capacity (e.g. 3000 N at a distance of 130 mm from the wall to the center of the pipe)
• non-aging EPDM rubber inlay
• strainless assembly due to optimum adjustability
• optimum sound insulation profile according to DIN 4109
• steel 1.0332 electrolytically galvanized
• Console CO² welded

SML Couplings

• Approval No Z-42.5-255
• Professional clamp made of stabilized chromium steel material number 1.4510/11 according to EN 10088-1
• Closure parts with only one screw
• Cylinder screw with internal hexagon 8.8, galvanized, yellow chromated
• Grip holders made of material number 1.4301
• Complete with inserted sealing collar made of EPDM, non-aging and resistant to hot water

Assembly instruction:

• Shift the complete coupling (1) up to the center distance ring of the sealing onto the pipe end or fitting
• Shift the following pipe end or fitting from the other side onto the connection
• Firmly tighten the hexagon socket screw (2) using an impact screw driver until the chucking slot (3) is closed. The tightening torque is achieved.

Securing Grip Collar for SML Coupling

• Approval No Z-42.5-255
• Galvanized securing clamp for SML pipe systems according to DIN 19 522/EN 877 and for twin-screw couplings
• For pipe systems with an pressure charge of up to 10 bar (ID50 - ID100), 5 bar (ID125 and ID150)

Fix Coupling

• Approval number Z-42.5-255
• Transition coupling including two sealing lips
• For SML pipe system according to DIN 19 522/ EN877 with other pipe systems
• Rubber cuff made of EPDM, tightening strap made of chrome nickel steel material number 1.450/11
• Advantage: No cutting required = saving time when assembling!

Assembly instruction:

• Put the complete Fix coupling included in the delivery on the pipe end or fitting up to the distance ring of the sealing and fix it using the tension ring (1)
• Pull the opening plug using tongs (2) and remove the rubber membrane
• Label the connection pipe at the required installation depth, provide it with lubricant and insert it

Seals IS/AS

• Seals according to DIN 4060/EN 681-1
• To connect SML pipe systems with other materials (e.g. HT pipes)

Seals I/A